Difference between revisions of "Astrill Setup Manual:Getting started with ASUS Merlin firmware for routers"

From Astrill Wiki
Jump to navigation Jump to search
Line 8: Line 8:
 
'''<u>ASUSWRT-Merlin firmware supported routers:</u>'''
 
'''<u>ASUSWRT-Merlin firmware supported routers:</u>'''
  
[[File:Asus-supported-routers.png|link=https://sourceforge.net/projects/asuswrt-merlin/files/]]
+
GT-AC2900
 
+
RT-AX86U
 +
RT-AX56U
 +
RT-AX58U
 +
RT-AX88U
 +
RT-AX3000
 +
RT-AC66U_B1
 +
RT-AC86U
 +
RT-N66U
 +
RT-AC1900
 +
RT-AC87U
 +
RT-AC5300
 +
RT-AC3200
 +
RT-AC3100
 +
RT-AC88U
 +
RT-AC68U
 +
RT-AC66U
 +
RT-AC56U
  
  
Line 37: Line 53:
 
== Installation of  Astrill router applet ==
 
== Installation of  Astrill router applet ==
  
Login into your account from Astrill website and go to '''TOOLS > Router Set-up'''
+
Login into your account from Astrill website and go to '''VPN SERVICE > Router Set-up'''
  
 
https://members.astrill.com/tools/router-set-up
 
https://members.astrill.com/tools/router-set-up

Revision as of 18:27, 5 January 2021

Install Astrill Router Applet directly onto ASUS Merlin firmware (RMerlin/ASUSWRT-Merlin firmware) routers.

Install ASUSWRT-Merlin Firmware

First check if you have compatible router, and then install ASUS Merlin Firmware onto your router.


ASUSWRT-Merlin firmware supported routers:

GT-AC2900 RT-AX86U RT-AX56U RT-AX58U RT-AX88U RT-AX3000 RT-AC66U_B1 RT-AC86U RT-N66U RT-AC1900 RT-AC87U RT-AC5300 RT-AC3200 RT-AC3100 RT-AC88U RT-AC68U RT-AC66U RT-AC56U


ASUSWRT-Merlin Firmware:


Developer website: http://www.lostrealm.ca/tower/

Changelog: https://github.com/RMerl/asuswrt-merlin/blob/master/README-merlin.txt

Source code: https://github.com/RMerl/asuswrt-merlin

Download: https://sourceforge.net/projects/asuswrt-merlin/files/


Enable JFFS on ASUS Router

Enable JFFS before installing the Astrill applet. On router UI we have to enable "JFFS partition", "Format JFFS partition at next boot" and "Enable JFFS custom scripts and configs" options under Administration / System tab and reboot router.

Asus-merlin-jffs-enable.png


NOTE: If you don't see JFFS on settings tab, please verify if you have installed ASUSWRT-Merlin firmware. Make sure you see (Merlin build) next to firmware version.

Installation of Astrill router applet

Login into your account from Astrill website and go to VPN SERVICE > Router Set-up

https://members.astrill.com/tools/router-set-up


Select AsusWRT (Merlin) for firmware, verify your router IP address and then click on Install button.

MembersPage-FirmwareSelect.png

MembersPage-FirmwareSelected.png


Then, you will be able to see the Command that needs to be run on the device for installation of Applet.

1. For versions of Merlin 374.40 or older, you can use RUN Command feature.

2. For versions of Merlin 374.41 or newer, you will need to enable Telnet feature and use this method for installation.

Installing Astrill on versions of Merlin 374.40 or older

Simply click on 'INSTALL' button; the command will automatically be input/run within RUN Cmd panel:

Screenshot-420.png


On successful installation, you will see a similar screen with relevant details(as mentioned in the screenshot below).

Merlin-Run-CMD.png


Done !

ASUS-RT-N66U-Astrill-VPN.png

Read more on our blog: http://blog.astrill.com/index.php/2013/05/02/astrill-router-applet-v-2-8-2-released/


Installing Astrill on versions of Merlin 374.41 or newer

To install Astrill applet on Merlin 374.41 or newer versions, you will need to use Telnet method. To enable Telnet within Merlin, kindly navigate to Administration Tab > System and select radio button with label 'Yes' to activate Telnet feature. Then scroll down and click on 'Apply'.

Enable-Telnet.png


For Windows, you might need to enable the Telnet(Windows built-in Client):

Windows-Feature.png


Enable-Telnet-Windows.png


TELNET METHOD

1. To Telnet into Router, kindly open Command Prompt and enter the following command 'Telnet Your Router's IP address', for e.g. 'telnet 192.168.2.1'

Asus-Merlin-Telnetting.jpg


2. Username would be root and password admin by default. If you've a different password, you would need to enter that.

Telnet-Password.jpg

Telnet-authenticated.jpg


3. After you've logged in, you can get Command To Be Run from Members Area. Kindly copy the command and paste it within Telnet console and hit Enter key:


CMD-COMMAND.png

Telnet-Run-Command.jpg


4. On successful installation of Astrill, you will be able to see 'Installed successfully!'

Astrill-Installed.jpg

Ran into Problems?

If you ran into "Segmentation fault" error message at any point, this indicates that you have problem with DNS resolver. This is usually caused by communication between your main router and Asus router.


Fix DNS Resolver:

Goto ASUS > WAN > Internet Connection

Under WAN DNS Setting, tick No option for Connect to DNS Server automatically.

Enter DNS of your choice, we used 8.8.8.8 and 8.8.4.4 (Google DNS), and then hit Apply to save changes.

Asus-dns.jpg


If you need assistance, contact support@astrill.com for remote desktop support.